You can use uv disintegrant. Or remove it by heating.

The uv adhesive will soften and peel off easily when heated. The high temperature resistance heating higher than the uv adhesive can remove the uv adhesive.

Use electric ferrochrome for heating. Note: This method is used for glass products, plastic products are not suitable, and the temperature control is not good.

Acetone and alcohol are both good ways to remove UV adhesives. Use acetone to clean it up a bit. Can only be used for glass, PC material, not acetone.

Physically, be careful, scrape it off with something similar to a blade. This kind of generally used uv adhesive has not good adhesion and is easy to scrape off, and then clean it with alcohol.

1. If you want to remove the uv adhesive, you can wipe it gently with a soft cloth, or wipe it with a paper towel, or wipe it with acetone or alcohol.

uv adhesive

2. The adhesion is not good, and the adherend needs to be separated or deleted to re-bond. According to the specific glue used and the specific material of the adherend, you can use a hair dryer to heat, boil, steam, and soak in acetone or ethanol.

3. Most of the uv adhesive adhesives are not very strong in water resistance, so you can try to soak for a long time, or you can peel off the fixed uv adhesive.

4. You can choose the commonly used uv debonding agent. The uv glue can be softened by contacting with the uv adhesive and easy to remove.

2. The adhesion is not good, and the adherend needs to be separated or deleted to re-bond. According to the specific glue used and the specific material of the adherend, you can use a hair dryer to heat, boil, steam, and soak in acetone or ethanol.

3. Most of the uv adhesive adhesives are not very strong in water resistance, so you can try to soak for a long time, or you can peel off the fixed uv adhesive.

4. The commonly used uv dissolving agent can be selected. The dissolving agent can contact with the uv adhesive to soften the uv adhesive and be easy to remove.